Acacia 10
No network port on this model. It connects with a standard audio cable. App and network control arrive with a new version in February 2027. Read moreSelf-powered 10 inch subwoofer with built-in 250W amplifier. Deep bass to 35Hz. RCA in, 2 × speaker out and a volume knob.
Pricing is quoted by your regional distributor. Find yours →
bass without the box.
On the floor or against the wall, in the rooms it was asked to fill. Every photo is a real installation; open one to read how it was done.
everything else.
Five drawers. Each opens in place, so nothing leaves the page.
A voice coil that stays cool under drive.
A copper-silver composite voice coil dissipates heat faster than copper alone, so the output holds under continuous high-power drive.
Resonance tuned below the cabinet.
Heavy cone mass lowers the resonant frequency below what the cabinet volume alone would allow, extending the low end of a thin enclosure.
- Power RMS
- 250W
- Power Peak
- 300W
- Impedance
- 4Ω
- Sensitivity
- 88dB
- Frequency
- 35Hz – 300Hz
- Driver
- 1 × 10"
- Dimensions
- H 380 × W 380 × D 215.9 mm
- Weight
- 14.4kg
- Housing
- Wood (Stainless Metal enclosure)
- Colours
- Champagne
- Custom RAL
- +20% · 45–60 days
- Power Type
- Powered
- Crossover
- Subwoofer LP only
- Max SPL
- 112dB
- Inputs
- Line In (RCA)
- Outputs
- 2Ch Speaker Out, 5V Out
2.1 TV room
A pair of Cane with the Acacia 10 Powered, the Air Mini streaming.
2.1 TV room, in the ceiling
A pair of Ghost with the Acacia 10 Powered, the Air Mini streaming.
A different room? Plan it in two minutes.
Room Solutions suggests the speakers and the sub for your room. Floorplan Sound Simulation predicts the coverage.The Acacia 10 Powered currently on sale has an RCA line input and on-board controls. It has no LAN port. Network (LAN) control, DSP adjustment in XSCACE Studio and the TCP/IP API come with the LAN version, officially launching in February 2027.
Need DSP control today? Pair a passive Acacia with a Xylem DSP amplifier for full crossover, EQ, delay and gain control in XSCACE Studio.
Controlled by XSCACE
XSCACE Studio
The LAN version of the Acacia 10 Powered connects over your local network. Adjust its built-in DSP in real time — crossover frequency, parametric EQ, output delay, and channel routing — without touching the hardware.
Works with any control system
The LAN version of the Acacia 10 Powered (from February 2027) exposes a full TCP/IP command API. Any IP-capable control system integrates natively — no middleware, no adapters.
What is the XSCACE Acacia 10 Powered?
Self-powered 10 inch subwoofer with built-in 250W amplifier. Deep bass to 35Hz. RCA in, 2 × speaker out and a volume knob. Specified for luxury home cinema rooms, large primary listening spaces, and high-end residential and hospitality installations in Canada, the UK, and India requiring maximum bass from a self-contained solution.
What is the frequency response of the Acacia 10 Powered?
The Acacia 10 Powered covers 35Hz–300Hz.
What is the power output of the Acacia 10 Powered?
The Acacia 10 Powered is rated at 250W RMS (300W peak) into 4Ω.
What type of product is the Acacia 10 Powered?
The Acacia 10 Powered is a subwoofer product.
How much space does the Acacia 10 Powered need?
The chassis is 380 mm high, 380 mm wide and 215.9 mm deep.
How deep is the Acacia 10 Powered?
The Acacia 10 Powered requires 215.9mm of depth.
take it with you.
What you need to specify it, show it to a client, or control it once it is in.