Acacia 10
Self-powered 10 inch subwoofer with built-in 300W amplifier. Deep bass to 35Hz with full I/O.
Pricing is quoted by your regional distributor. Find yours →
bass without the box.
On the floor or against the wall, in the rooms it was asked to fill. Every photo is a real installation; open one to read how it was done.
everything else.
Five drawers. Each opens in place, so nothing leaves the page.
A voice coil that stays cool under drive.
A copper-silver composite voice coil dissipates heat faster than copper alone, so the output holds under continuous high-power drive.
Resonance tuned below the cabinet.
Heavy cone mass lowers the resonant frequency below what the cabinet volume alone would allow, extending the low end of a thin enclosure.
- Power RMS
- 250W
- Power Peak
- 300W
- Impedance
- 4Ω
- Sensitivity
- 88dB
- Frequency
- 35Hz – 300Hz
- Driver
- 1 × 10"
- Dimensions
- H 380 × W 380 × D 215.9 mm
- Weight
- 14.4kg
- Housing
- Wood (Stainless Metal enclosure)
- Colours
- Stainless Steel
- Custom RAL
- +20% · 45–60 days
- Power Type
- Powered
- Crossover
- Subwoofer LP only
- Max SPL
- 112dB
- Inputs
- Line In (RCA)
- Outputs
- 2Ch Speaker Out, LFE On/Off Button, 5V Out
2.1 TV room
A pair of Cane with the Acacia 10 Powered, the Air Mini streaming.
2.1 TV room, in the ceiling
A pair of Ghost with the Acacia 10 Powered, the Air Mini streaming.
A different room? Plan it in two minutes.
Room Solutions suggests the speakers and the sub for your room. Floorplan Sound Simulation predicts the coverage.Controlled by XSCACE
XSCACE Studio
Connect to the Acacia 10 Powered over your local network. Adjust the built-in DSP in real time — crossover frequency, parametric EQ, output delay, and channel routing — without touching the hardware.
Works with any control system
The Acacia 10 Powered exposes a full TCP/IP command API. Any IP-capable control system integrates natively — no middleware, no adapters.
What is the XSCACE Acacia 10 Powered?
Specified for luxury home cinema rooms, large primary listening spaces, and high-end residential and hospitality installations in Canada, the UK, and India requiring maximum bass from a self-contained solution.
What is the frequency response of the Acacia 10 Powered?
The Acacia 10 Powered covers 35Hz–300Hz.
What is the power output of the Acacia 10 Powered?
The Acacia 10 Powered is rated at 250W RMS (300W peak) into 4Ω.
What type of product is the Acacia 10 Powered?
The Acacia 10 Powered is a subwoofer product.
How much space does the Acacia 10 Powered need?
The chassis is 380 mm high, 380 mm wide and 215.9 mm deep.
How deep is the Acacia 10 Powered?
The Acacia 10 Powered requires 215.9mm of depth.
take it with you.
What you need to specify it, show it to a client, or control it once it is in.