Acacia 6
Self-powered 6 inch subwoofer with built-in 200W amplifier, line input, speaker output, and LFE control.
Pricing is quoted by your regional distributor. Find yours →
bass without the box.
On the floor or against the wall, in the rooms it was asked to fill. Every photo is a real installation; open one to read how it was done.
everything else.
Five drawers. Each opens in place, so nothing leaves the page.
A voice coil that stays cool under drive.
A copper-silver composite voice coil dissipates heat faster than copper alone, so the output holds under continuous high-power drive.
Resonance tuned below the cabinet.
Heavy cone mass lowers the resonant frequency below what the cabinet volume alone would allow, extending the low end of a thin enclosure.
- Power RMS
- 200W
- Impedance
- 4Ω
- Sensitivity
- 84dB
- Frequency
- 35Hz – 300Hz
- Driver
- 1 × 6"
- Dimensions
- H 266.7 × W 266.7 × D 177.3 mm
- Weight
- 9.5kg
- Housing
- Birch Wood / MDF / Aluminium
- Colours
- Stainless Steel
- Custom RAL
- +20% · 45–60 days
- Power Type
- Powered
- Crossover
- Subwoofer LP only
- Max SPL
- 107dB
- Inputs
- Line In (RCA), LAN (Network Control)
- Outputs
- 2Ch Speaker Out, 5V Out
- Control
- Network API
2.1 music, up to 400 sq ft
A pair of Bonsai with the Acacia 6 Powered under them, the Air Mini streaming.
2.1 music, up to 800 sq ft
Two pairs of Bonsai and two Acacia 6 Powered, one Air Mini feeding them.
A different room? Plan it in two minutes.
Room Solutions suggests the speakers and the sub for your room. Floorplan Sound Simulation predicts the coverage.Controlled by XSCACE
XSCACE Studio
Connect to the Acacia 6 Powered over your local network. Adjust the built-in DSP in real time — crossover frequency, parametric EQ, output delay, and channel routing — without touching the hardware.
Works with any control system
The Acacia 6 Powered exposes a full TCP/IP command API. Any IP-capable control system integrates natively — no middleware, no adapters.
What is the XSCACE Acacia 6 Powered?
Suited to luxury residential rooms, media rooms, and commercial installations in Canada, the UK, and India requiring a compact self-contained subwoofer without additional amplification.
What is the frequency response of the Acacia 6 Powered?
The Acacia 6 Powered covers 35Hz–300Hz.
What is the power output of the Acacia 6 Powered?
The Acacia 6 Powered is rated at 200W RMS into 4Ω.
What type of product is the Acacia 6 Powered?
The Acacia 6 Powered is a subwoofer product.
How much space does the Acacia 6 Powered need?
The chassis is 266.7 mm high, 266.7 mm wide and 177.3 mm deep.
How deep is the Acacia 6 Powered?
The Acacia 6 Powered requires 177.3mm of depth.
take it with you.
What you need to specify it, show it to a client, or control it once it is in.