Aspen 6
Aspen 6 brings subtle enveloping audio to small and medium rooms. Installs cleanly, vanishes visually.
Pricing is quoted by your regional distributor. Find yours →
it disappears into the ceiling.
Flush in plaster and timber ceilings, with the grille painted to match. Every photo is a real installation; open one to read how it was done.
everything else.
Five drawers. Each opens in place, so nothing leaves the page.
Every driver held to ±0.5 dB.
The crossover is the most overlooked part of a speaker. Hand-selected air-core inductors and polypropylene capacitors hold the drivers to ±0.5 dB of each other at the crossover point.
A voice coil that stays cool under drive.
A copper-silver composite voice coil dissipates heat faster than copper alone, so the output holds under continuous high-power drive.
- Power RMS
- 100W
- Impedance
- 8Ω
- Sensitivity
- 87dB
- Frequency
- 50Hz – 22kHz ±3dB
- Driver
- 1 × 6"
- Driver Material
- Graphite Cone Woofer
- Diameter
- 248.4 mm
- Weight
- 1.9kg
- Housing
- ABS
- Colours
- White
- Custom RAL
- +20% · 45–60 days
- Power Type
- Passive
- Cutout Ø
- 208.9 mm
- Cavity Depth
- 115mm
- Paintable Grille
- Yes
- Grille Material
- Mild Steel
- Crossover
- Built-In Passive Crossover (2-way)
- Max SPL
- 108dB
- THD+N
- ≤0.2% @ 1W/1m
Powder room or foyer
One Aspen 6 on an Air Amp: streaming and amplification in one box.
7.2.2 home cinema
Sage across the front, Bergenia surrounds, Aspen 6 overhead, two Junipers, amplified by a Lucifer 8 and a Lucifer 4.
One pair covers a room up to 18 × 18 ft (bedrooms, dining rooms, small offices). Larger rooms take a second pair, or a bigger speaker from the range.
A different room? Plan it in two minutes.
Room Solutions suggests the speakers and the sub for your room. Floorplan Sound Simulation predicts the coverage.
Dog-leg clamps, tightened with screws
Aspen 6 held in the cut-out by dog-leg clamps; the hardware is in the box.
What is the XSCACE Aspen 6?
Aspen 6 brings subtle enveloping audio to small and medium rooms. Installs cleanly, vanishes visually. Widely specified for residential multi-room audio, hospitality background music, and commercial retail environments across the UK, Europe, and India.
What is the frequency response of the Aspen 6?
The Aspen 6 covers 50Hz–22000Hz (±3dB).
What is the power output of the Aspen 6?
The Aspen 6 is rated at 100W RMS into 8Ω.
Is the Aspen 6 an in-ceiling, in-wall, or slim-array speaker?
The Aspen 6 is an in-ceiling product. Mounting: dog-leg clamps, tightened with screws.
How deep is the Aspen 6?
The Aspen 6 requires 107.95mm of depth (115mm cavity), engineered to sit as close to flush as the driver geometry allows.
take it with you.
What you need to specify it, show it to a client, or control it once it is in.
To control
The Aspen 6 pairs a 6-inch woofer with a 1-inch silk soft dome tweeter for a frequency range of 50Hz–22kHz and 100W of headroom — sized for bedrooms, dining rooms, and small offices up to 18×18 ft. Its in-ceiling profile disappears into a standard ceiling cavity while delivering clear, detailed sound across the full listening range.