Banyan Canopy
The Canopy is the top speaker module of the Banyan Set — a wide-dispersion line array powered by the Banyan Pith DSP subwoofer.
Pricing is quoted by your regional distributor. Find yours →
it disappears into the garden.
In gardens, on terraces and by pools, built to stay out. Every photo is a real installation; open one to read how it was done.
everything else.
Five drawers. Each opens in place, so nothing leaves the page.
Every driver held to ±0.5 dB.
The crossover is the most overlooked part of a speaker. Hand-selected air-core inductors and polypropylene capacitors hold the drivers to ±0.5 dB of each other at the crossover point.
A voice coil that stays cool under drive.
A copper-silver composite voice coil dissipates heat faster than copper alone, so the output holds under continuous high-power drive.
- Power RMS
- 600W
- Impedance
- 8Ω
- Sensitivity
- 96dB
- Frequency
- 85Hz – 20kHz −10 dB
- Driver
- 6 × 5"
- Driver Material
- Polypropylene Cone, Rubber Edge
- Dimensions
- H 1300 × W 173 × D 147 mm
- Weight
- 21kg
- Housing
- Birch Wood
- Colours
- Black
- Power Type
- Passive
- IP Rating
- IP66
- Mounting
- Banyan Pith top socket, Wall Mount, Baseplate, Hanging Mount, Pole Mount
- Paintable Grille
- No
- Grille Material
- Mild Steel
- Crossover
- Managed by Banyan Pith DSP module
- Max SPL
- 135dB
- THD+N
- ≤0.2% @ 1W/1m
Party zone
One Banyan Set: the Canopy on its Pith, which carries the amplification and DSP, fed by the Air Mini.
Garden
Two Banyan Sets for a large garden, one Canopy per Pith, one Air Mini as the source.
A different room? Plan it in two minutes.
Room Solutions suggests the speakers and the sub for your room. Floorplan Sound Simulation predicts the coverage.
Banyan Pith top socket
Banyan Canopy installed; the hardware is in the box.
Wall mount
Banyan Canopy on the wall; the hardware is in the box.
Baseplate
Banyan Canopy free-standing; the hardware is in the box.
Hanging mount
Banyan Canopy hung from above; the hardware is in the box.
Pole mount
Banyan Canopy on a pole; the hardware is in the box.
What is the XSCACE Banyan Canopy?
The Canopy is the top speaker module of the Banyan Set — a wide-dispersion line array powered by the Banyan Pith DSP subwoofer. Ideal for large outdoor hospitality spaces, resort pool areas, garden events, and luxury outdoor entertainment in Canada, the UK, India, and the Middle East.
What is the frequency response of the Banyan Canopy?
The Banyan Canopy covers 85Hz–20000Hz (−10 dB).
What is the power output of the Banyan Canopy?
The Banyan Canopy is rated at 600W RMS into 8Ω.
Is the Banyan Canopy an in-ceiling, in-wall, or slim-array speaker?
The Banyan Canopy is an outdoor product.
How deep is the Banyan Canopy?
The Banyan Canopy requires 147mm of depth.
Is the Banyan Canopy rated for outdoor or wet-area use?
Yes, the Banyan Canopy carries an IP66 ingress protection rating and is marine-treatable.
take it with you.
What you need to specify it, show it to a client, or control it once it is in.